ASW-210 Wireless two-channel 230 V AC in-wall controller

Product reference: BSASW-210

The ASW-210 module is designed to remotely switch on/off devices powered from 230 V AC mains. It operates as part of the ABAX 2/ABAX two-way wireless system.

The controller has compact dimensions and is designed for in-wall mounting.

The device is provided with two control inputs designed to connect e.g. wall switches (mono- and bistable).

Read more
At stores prices may vary
Price:
€49.51
€40.92 tax excl.

Product information

Configuration and updating of firmware is carried out remotely. Radio communication in the ABAX 2 system is AES encrypted.

Operating temperature range
-10°C...+55°C
Supply voltage (±15%)
230 V AC, 50-60 Hz
Standby mode current consumption
5,5 mA
Weight
40 g
Maximum humidity
93±3%
Operating frequency band
868,0 ÷ 868,6 MHz
Dimensions
47 x 47,4 x 22 mm
Environmental class according to EN50130-5
II
Complied with standards
EN 50130-4, EN 50130-5
Radio communication range (in open area) for ACU-220
up to 1000 m
Radio communication range (in open area) for ACU-280
up to 1000 m
Wetting current
10 mA
Contact rating
5 A
Maximum switching power, AC1
1250 VA
Radio communication range (in open area) for ABAX
up to 500 m
Rated contact voltage
250 V AC
Load capacity of relay outputs in AC1 category
5 A / 250 V AC
Minimum switching power
50 mW
Electrical endurance (number of switching cycles), AC1 (360 cycles/h)
>°10⁵
Contacts resistance
≤ 100 mΩ
© UAB “Eproma” All rights reserved