Vibro sensor for fence protection GAPID, cable length 2 m

Product reference: gapid2m

  • Smart triaxial vibration sensor GAPID with tilt sensor;
  • Designed to protect against breaking into, climbing over, cutting the fence;
  • Can be connected to any switchboard;
  • Protection within a radius of 5 m;
  • 6 different settings according to the type of protected surface;
  • Sensitivity adjustment;
  • Learning (self-learning) functions to avoid false alarm;
  • Minimum detectable vibration 0.5 mG;
  • Minimum detectable deviation 10°;
  • Connects with 6 wires.
  • Power supply 10-30 Vdc;
  • Dimensions: 102x52x19 mm;
  • Operating temperature -40°C / + 80°C;
  • IP66.
  • Cable length 2 m.
Read more

Product information

Gapid is a smart triaxial vibro sensor with a tilt sensor, designed to protect against fence penetration, climbing over, cutting. Can be connected to any security control panel. Expansion options depend on the capabilities of the central office.

Setting functions and sensitivity:

Gapid main functions

With the switch it is possible to set the type of fence/surface on which the sensor operates:

1. Segmental fence (up to 5 mm ropes)

Gapid tvoros tipas

2. Metal fence (> 5 mm wire)

180

3. Braided mesh fence

Gapid

4. Reinforced mesh fence

pavirsiaus%20tipas%204.jpg

5. Walls, railings

pavirsiaus%20tipas%205.jpg

6. Glass walls, windows

pavirsiaus%20tipas%206.jpg

Also, 3 "learning" modes of the system are set with the switch:

7. "Training" for the alarm - designed to record the actions that will trigger the alarm. Intended for non-standard actions (standard - climbing, cutting, breaking, etc.). A simulated vibration that will trigger an alarm is recorded.

8. Elimination / rejection (disqualification). A certain vibration from the environment is recorded, to which the sensor must not react. For example passing train, heavy vehicle, etc. similar vibrations to be eliminated.

9. Resonance elimination (spontaneous vibration) - designed to memorize a specific repetitive vibration (resonant wave caused by wind, etc.) to eliminate.

10. Reset - all set "trainings" are removed.

Sertificates

© UAB “Eproma” All rights reserved